|
|
|
Accessories
|
Calibrated aluminium outlet nozzle for injector IG5 Noumea. |
|
Heating to place in contact with the injector body, controlled by a temperature sensor and an advanced electronic controller that controls operation only if necessary, to avoid useless current consumption and a possible too high temperature.
Easy to mount and dismount, it doesn’t need maintenance. This device can reduce and solve sticking problem on the injector seat and facilitates internal plunger movements when injector is dirty.
Patented
|
|
Cleaning kit for LPG and Natural Gas injectors.
Designed to clean injectors throughly without disassembling them from the vehicle. Suitable for all LPG and Natural Gas injectors and sequential systems operating up to a maximum pressure of 4/5 Bar.
Patented
|
|
Manual tool designed to calibrate and set injectors type IG3 Horizon. |
|
Manual tool designed to calibrate and set injectors type IG1 Phoenix, IG1 Apache, IG2 Metis and IG2 Namur. |
|
Liquid cleaner for LPG and Natural Gas injectors. |
|
Manifolds to use with single injectors IG2 Metis and IG2 Namur. |
|
Spare filter cartridge for filter type FG2. |
|
Replacement kit made up of a plunger, spring and O-ring body. Available for injectors IG3 Horizon. |
|
Replacement kit made up of a plunger, spring and O-ring sleeve. Available for injectors IG1, IG2 Metis and IG2 Namur and version for IG1 Phoenix. |
|
LPG/CNG Temperature Sensor to be mounted on pipes, NTC sensor 4.7 kOhm. It will be supplied with integrated SICMA two ways connector or with two stripped wires. |
|
Pressure and Temperature Sensor |
|
Pressure and temperature sensor for injectors IG3 Horizon, IG1 Apache and IG1 Phoenix. |
|
IG3 connector with temperature sensor |
|
Pipe fitting for internal rubber pipe diameter size 5 or 6mm for pressure signal outlet on the injector’s outlet, with included temperature sensor NTC 4.7 kOhm. Designed for IG3 Horizon. |
|
IG1 connector with temperature sensor |
|
Pipe fitting for internal rubber pipe diameter size 5 or 6mm for pressure signal outlet on the injector’s outlet, with included temperature sensor NTC 4.7 kOhm. Designed for injectors IG1 Phoenix and IG1 Apache. |
|
Temperature sensor M5 with brass body for injectors IG1 Phoenix and IG1 Apache and for sequential reducers units. 4.7 kOhm NTC sensor. |
|
|
Wired cable L=500mm, with male connector, AMP superseal female holder for connecting injector ignition coils. |
|
Y-connector made of thermoplastic resin for pipe sizes 5/10 and 12mm. |
|
Adaptor connector for 8 mm copper pipe applications. |
|
Gas inlet connector for pipe diameter size 10/12mm, with built-in temperature sensor NTC. Versions available 4.7 kOhm and 10 kOhm. Can be mounted on injectors IG1 Phoenix and IG1 Apache. |
|
Gas inlet connector for pipe diameter size 16mm; designed for injectors IG1 Phoenix and IG1 Apache. |
|
Gas inlet connector for pipe diameter size 1/2”; designed for injectors IG1 Phoenix and IG1 Apache. |
|
Gas inlet connector for pipe diameter size 3/8”; designed for injectors IG1 Phoenix and IG1 Apache. |
|
Pipe fitting for internal rubber pipe diameter size 5 or 6mm for pressure signal outlet on the injector’s outlet. Designed for injectors IG1 Phoenix and IG1 Apache. |
|
Brass intake manifold nozzle for all types of sequential applications. It is an option to use in place of the standard one that is present now on all our injectors. It improves efficiency and quality of mixing between air and gas. |
|
Calibrated brass nozzle for IG2 Namur, direct mounting. |
|
Calibrated brass outlet nozzle for injector types IG1 Apache / IG1 Phoenix / IG2 Metis / IG3 Horizon. |
|
|
|
|
|
|
|
|
